Welche Einstellungen zur Nachführung wählen?

Status
Es sind keine weiteren Antworten möglich.

martinvoelkel

Aktives Mitglied
Hallo Leute,

Habe ein Frage:

Bei meinem Celestron SC 8" (AVX) Findet man unter "Menü" --> "Teleskop" --> "Tracking Rate" die Möglichkeit "sidereal" und "R.A. & DEC" bzw. "R.A. only" bzw. "OFF" zu wählen.
Was stelle ich denn ein, damit das Teleskop in Verbindung mit dem MGEN - Autoguider sauber nachführt?

Ich habe nämlich den Eindruck, dass Celestron hier nur bestimmte Kombinationen zulässt. Habe ich z.B. "sidereal" sowie "R.A. & DEC" gewählt, so zeigt das Menü beim nächsten Aufruf plötzlich wieder eine andere Einstellung, z.B "sidereal" und "OFF".

Kann mir jemand helfen? Oder scheint das ein Bug zu sein?

Lieben Dank und CLS!
 
Servus!

Bitte sehr:

Tracking Menu
Tracking Mode
– This allows you to change the way the
telescope tracks depending on the type of mount being used
to support the telescope The telescope has three different
tracking modes:


eQ north
– Used to track the sky when the telescope is
polar aligned in the Northern Hemisphere

eQ South
– Used to track the sky when the telescope
is polar aligned in the Southern Hemisphere

off
– When using the telescope for terrestrial (land)
observation, the tracking can be turned off so that the
telescope never moves
Tracking rate
– In addition to being able to move the
telescope with the hand control buttons, your telescope
will continually track a celestial object as it moves across
the night sky
The tracking rate can be changed depending
on what type of object is being observed:

Sidereal
– This rate compensates for the rotation of the
Earth by moving the telescope at the same rate as the
rotation of the Earth, but in the opposite direction When
the telescope is polar aligned, this can be accomplished
by moving the telescope in right ascension only

lunar
– Used for tracking the Moon when observing the
lunar landscape

Solar
– Used for tracking the Sun when solar observing
with the proper filter

 
Hallo Toni,
danke für die schnelle Antwort!
Aber ganz schlau bin ich immer noch nicht.
Ich würde gemäß dem, was ich schon weiß bzw. Deinem Statement "sidereal" UND "R.A" (bei gutem Alignment)bzw "R.A. + DEC" wählen.
Nur komisch, dass mein Celestron mit dem Starsense -Handcontroller diese Kombination scheinbar so wenig mag, dass es immer wieder die Einstellung verändert.

Hat jemand dasselbe Problem?
 
Hi,

kann es sein, dass die Montierung immer nur die Selektion anzeigt, die nicht ausgewählt ist?
Heißt alles was eh angewählt ist, brauch der Handcomputer auch nicht als mögliche Auswahl angeben?

 
Hallo Martin

In Kombi mit dem MGEN ist es vor allem wichtig, dass die Autoguide Rate auf 0.5 steht resp. auf 1 am Controller.

Ich habe zwar keine AVX (mehr), aber der Tracking Mode ist (natürlich) North und die Tracking Rate wäre Sidereal.

Grüsse
David
 
Status
Es sind keine weiteren Antworten möglich.
Oben