Fokussieren am RC

Status
Es sind keine weiteren Antworten möglich.

MartinKrahn

Aktives Mitglied
Hallo,
ich beschäftige mich -zunächst theoretisch- mit der Anschaffung eines RC und habe folgende Anfängerfrage:
Die Fokussierung über einen OAZ ist trivial, aber wie ist das mit der Fokussierung über einen Stellmotor am Sekundärspiegel, wie es größere Teleskope eh haben?
Ich las, dass der Abstand Primär- zum Sekundärspiegel kritisch für die Abbildung ist und sphärische Aberrationsbilder erzeugen kann, wenn er nicht stimmt. Wieso fokussiert man auch so? Größere Amateurgeräte werden mit OAZ und Stellmotor am Sekundärspiegel angeboten - mit welchem fokussiert man dann und warum?
Danke vorab,
Schönen Gruß,
Martin
 
Hallo,
die erschöpfend zahllosen Antworten auf meine Frage haben mich veranlasst, die Lösung selbst zu finden Russel Croman hat mit diesem Überblick:
geholfen, im Anfang schreibt er über das Problem:
...A consequence of the Richey-Chrétien design is that the spacing between the primary and secondary mirror must be kept very near the value intended by the optician who figured the mirrors. If this spacing is allowed to deviate much more than a few millimeters, significant deterioration of performance will result due to spherical aberration. The method of focusing by moving the secondary mirror is thus at odds with maintaining the performance of the system. The solution is to locate the instrument, be it a CCD camera, an eyepiece or what have you, close to the focal point of the telescope with the secondary mirror at its proper distance from the primary. The secondary focuser can then be moved only for fine adjustment of the focus.
Wenn also der Abstand sicher korrekt und die Abbildung ohne sphärische Aberration ist, sollte ein herkömmlicher OAZ ausreichen.
Gruß,
Martin
 
Status
Es sind keine weiteren Antworten möglich.
Oben